Parts Search Results for: sealed

Miniature, sealed toggle switches, UL certified, IP67, numerous panel mount and through hole options, actuator and bushing options, single or double pole, latching or momentary, gold or silver contacts, epoxy sealed

Subminiature, sealed toggle switches, UL certified, IP67, numerous through hole mounting options, two actuator height options, bushing options, single or double pole, latching or momentary, silver or gold contacts, epoxy sealed.

Subminiature, sealed toggle switches, IP67, surface mount right angle mounting design, Single pole, latching or momentary, silver or gold contacts, epoxy sealed, tape and reel packaged

Ultraminiature, sealed toggle switches, IP67, multiple through hole mounting options, single or double pole, latching or momentary, gold contacts, epoxy sealed

Miniature rocker switches sealed to an IP67 rating and available in gold or silver contacts, with multiple termination options for PC board or panel mounting.

The 400A Series subminiature rocker switch is sealed at an IP67 rating and available for panel mounting or PC board mounting.

This subminiature, sealed rocker switch is IP67 rated and comes with many actuator and termination options with silver contacts power rated for up to 3 amps.

Sealed to an IP67 rating, these through hole vertical or right angle slide switches offer single or double-pole circuits, 2 or 3 positions, with gold contacts, and epoxy sealed terminals.

Sealed pushbutton switch with a snap acting contact design rated IP67 for protection from dust and moisture. Gold or silver contact options.

These subminiature pushbutton switches are sealed to IP67 ratings and offer multiple termination and bushing options. SPST or SPDT functions.

SMT surface mount subminiature pushbutton switches featuring SPST or SPDT functions, tape and reel packaging, and 3A ratings.

Ultraminiature, sealed pushbutton switch is sealed to an IP67 rating and has multiple termination options.

These sealed, illuminated pushbutton switches are IP65 and power rated with circuits up to 4 poles to perform momentary, maintained or pilot functions in multiple colors.

Dust and water resistant to IP65, this anti-vandal switch has a long life expectancy and a panel cutout size of 16mm (6mm max. depth). It offers an Off-(On) configuration and your choice of domed, flat, or high actuator options.

These anti-vandal switches have dot and ring illumination options, 1- or 2-pole circuits performing momentary functions and are available with either IP40 (non-water resistant) or IP67 (water resistant) ratings. They fit in a panel cutout sized 16mm, with a maximum depth of 8mm.

This switch offers dot and ring illumination options, 1 or 2 poles for performing maintained and momentary functions and double break functions, with an IP65 rating for dust and water resistance. It is meant for a panel cutout sized 19mm, with a maximum depth of 11mm.

These long life anti-vandal switches have solder lug or screw terminal options, and are 1-pole, momentary switches with an IP65 rating for protection against dust and moisture. They fit in a panel cutout sized 12mm with a maximum depth of 5mm.

These anti-vandal switches have an IP65 rating for protection against dust and moisture, dot and ring illumination options, and have solder lug or wire lead terminal options. They are meant for a panel cutout 16mm in size with a maximum depth of 10mm.

These pushbutton switches have a 22mm diameter panel cutout, dot and ring illumination options, 1-pole, double break function and are IP65 rated.

These switches are meant for a panel cutout 25mm in diameter, feature dot and ring illumination, 1 or 2 poles, maintained and momentary, double-break functions, and are IP65 rated.

Anti-vandal switch offering a 28mm diameter cutout size with an IP66 rating for dust and moisture protection and dot or ring illumination.

IP67 sealed lamp indicator switch with multiple panel cutout sizes ranging from 6mm to 19mm in diameter.

This sealed rocker switch is IP67 rated & UL listed. LED illumination options, custom actuator markings available, and an ergonomic actuator design. Fits in panel cutout 21.1mm x 37mm.

Rocker switch meant for 13.8mm x 30.2mm cutouts and with cURus and ENEC agency approvals. Illumination, marking, terminal and actuator options. Electrical ratings from 16 to 25 amps.

The RB5 Series rocker switch is sealed to an IP67 rating, requires a 22mm x 30.2mm cutout and has electrical ratings ranging from 16 to 25 amps, along with the required agency approvals.

The RBW2 Series illuminated rocker switch is sealed to IP66 ratings without requiring a rubber boot. UL approved to 1/3 HP and [cURus] approved for up to 16 amps. Fits panel cutout sized 22mm x 30mm.

These sealed, ultra slim rotary DIP switches are sealed to IP67, offer multiple PCB termination options including SMT, through hole, and right angle, multiple shaft actuator options, 10 or 16 positions, and tube or tape and reel packaging.

These rotary DIP switches offer IP67, multiple PCB termination options including SMT, through hole, and right angle, multiple actuator options, 4, 6, 8, 10, or 16 positions, gold contacts, and tube or tape and reel packaging.

Square, sealed pushbutton switches are protected from moisture at an IP67 rating and have a mechanical life expectancy of 100,000 cycles.

High current rocker switch features an internal dust and water protection seal rated IP54. Glossy finish and multiple marking options and switch functions are available. Fits a panel cutout sized 21 x 36.8mm.

The ST4 Series sealed toggle switches fit a 12mm diameter panel cutout, and are rated IP68, offering a single pole or double pole circuit with 2 or 3 positions, four termination options, three electrical rating options, UL certified, and a 17mm metal bat or 22mm plastic bat actuator.

This sealed, through hole detector switch is sealed to IP67, measures 8.2mm x 5.25mm, and has a pin plunger actuator, requiring 35gf to electrical make, and 100gf to full stroke.

These sealed, long life detector switches are sealed to IP67, measure 8.25mm x 5.25mm, offer both panel mount (solder) or through hole (PC pin) design, a pin plunger, straight lever, or leaf lever actuator, and silver contacts.

These long life, sealed, surface mount tactile switches measure 6.45mm x 6.45mm, are sealed to IP67, have a long life of up to 3 million cycles, offer a 3.5mm or 5.2mm actuator, 180gf, 260gf, or 350gf operating force, and silver contacts.

This sealed, surface mount right angle tactile switch measures 7.1mm x 6.6mm and is sealed to IP67, features robust PCB soldering pads, and offers 160gf operating force, and silver contacts.

These sealed, through hole tactile switches measure 8mm x 8mm with a 13mm actuator height, are sealed to an IP67, and offer 160gf or 260gf operating force options, with silver contacts, and radial packaging.

These sealed, through hole tactile switches measure 7.4mm x 7.4mm, are sealed to IP67, and offer multiple actuator heights, operating forces, and a long life of up to 1 million cycles, and silver or gold contacts.

These sealed, through hole tactile switches measure 7.4mm x 7.4mm, are sealed to IP67, come with an earth ground terminal, and offer multiple actuator heights, operating forces, and a long life of up to 1 million cycles, with silver or gold contacts.

These sealed, through hole right angle tactile switches measure 8.3mm x 5.8mm, are sealed to IP67, and offer multiple actuator heights, operating forces, and a long life of up to 1 million cycles, with silver or gold contacts.

These sealed, surface mount tactile switches measure 7.4mm x 7.4mm, are sealed to IP67, and offer multiple actuator heights, operating forces, and a long life of up to 1 million cycles, and silver or gold contacts.

These sealed, long life, surface mount tactile switches measure 6.2mm x 6.2mm, are IP67 rated, and offer up to 5,000,000 life cycles, multiple actuator heights and operating forces, gull wing or J lead termination, and silver contacts.

This sealed, through hole right angle tactile switch measures 6.55mm x 6.4mm and is IP67 rated, offering 300,000 cycle life, a 350gf operating force, and silver contacts.

These sealed surface mount tactile switches measure 6.3mm x 6.3mm and are sealed to IP67, with several actuator height and operating force options, gull wing termination and silver contacts.

These sealed, through hole right angle tactile switches measure 12mm x 11.5mm, and offer multiple operating forces, a 2.9mm actuator height, silver or gold contacts, and an additional round button cap with different color options.

These sealed, long life tactile switches measure 10.1mm x 10.1mm, are sealed to IP67, and offer a long life of 10,000,000 cycles. Both SMT (gull wing) and through-hole termination options are available, with many actuator length options, and silver contacts.

These sealed, illuminated, surface mount tactile switches measure 6.2mm x 4.6mm and are sealed to IP67, with numerous LED color options, a 3.72mm actuator, 200gf operating force, and silver contacts.

These sealed, illuminated, through hole tactile switches are sealed to IP67, come in both vertical and right angle mounting, and offer 200gf or 450gf, with many LED color options, and four additional cap options.

This sealed, long life, through hole tactile switch measures 12mm x 12mm, is sealed to IP67, and has a long life of 10,000,000 cycles. It offers multiple actuator heights and operating forces, and has silver contacts.

These sealed, surface mount tactile switches measure 4.6mm x 2.8mm and are sealed to IP67, offering multiple actuator heights and operating forces, with silver contacts.

This sealed, surface mount right angle tactile switch measures 3.85mm x 1.95mm, with a 2.9mm height, and is sealed to IP67, with a 160gf operating force and silver contacts.

These sealed, surface mount tactile switches measure 6mm x 3.5mm and are sealed to IP67, offering two actuator height options and two actuation force options, with silver contacts.

These sealed, long life, surface mount tactile switches measure 6.9mm x 6.2mm and are sealed to IP67, with up to 500,000 cycle life, offering either a flush or 3.4mm actuator, 160gf or 260gf, gull wing or J lead termination, and silver contacts.

These sealed, long life, surface mount tactile switches measure 6.3mm x 6.2mm and are sealed to IP67, with up to 1,000,000 cycle life, 160gf or 260gf, a 3.1mm actuator, and silver contacts.

This sealed, surface mount tactile switch measures 8.4mm x 8.4mm and is sealed to IP67, with a 500,000 cycle life, a 3.95mm actuator, 400gf operating force, gull wing termination, and silver contacts.

UL certified anti-vandal switch rated IP67 for dust and moisture protection. It fits a panel cutout 25mm in diameter with a maximum depth of 10mm.

High current rocker switch with an internal dust and water protection seal rated IP55. It handles up to 20 amps and comes with 2-pole circuits for performing various functions. It fits a panel cutout sized 22 x 30mm.

This snap action switch is sealed to an IP67 rating for dust and moisture and offers multiple termination options, including wire leads.

A panel mount snap action switch sealed to an IP67 rating for dust and moisture protection with SPDT On-(On) function, multiple electrical ratings, pin plunger actuator and solder lug or 162mm long wire lead termination.

Snap action switch rated IP67 for dust and moisture protection, handles up to 2 amps, has a long life expectancy and comes with multiple terminal options.